How To Reset Whirlpool Cabrio Washer Lid Lock. The lid lock light will flash if lid lock has not moved into the lock position, the lock motor can not be powered, or the lid is not closed completely due to interference. Clean all contact areas on the lid and the washer.
Plug the washer back in and see if the problem resolves. Try unplugging the washer to allow the control panel to reset. Beside above, how do i reset the lid lock on a whirlpool cabrio washer?
Table of Contents
The Lid Locks During This Cycle In Order To Ensure That No Disruption Occurs While The Water Is Being Filled.
Whirlpool cabrio washing machine lid lock latch replacement. Next, plug it back in and wait for half a minute before restarting the washer. Plug the washer back in and see if the problem resolves.
Set The Mode Selector Dial To Normal.
To diagnose this problem you’ll want to put the washer in a spin mode. Try unplugging the washer to allow the control panel to reset. How to bypass lid lock on whirlpool washer.
Left It Unplugged For An Hour, Still The Same Thing.
How to reset whirlpool cabrio washer: Beside above, how do i reset the lid lock on a whirlpool cabrio washer? If you happened to face this problem, then try to follow the guide on how to reset whirlpool cabrio washer lid lock below:
Clean All Contact Areas On The Lid And The Washer.
Plug the washer back in and see if the problem resolves. How can i help with your appliance question? How to reset whirlpool cabrio washer:
I Have A Whirlpool Cabrio That Is Stuck With The Lid Locked And An F2 Code.
Whirlpool cabrio washer locking issues when your washer lid unlocks, it could throw off the calibration, which may cause your machine to overfill or not fill enough. If your whirlpool cabrio washer will fill with water but won’t spin, the lid lock switch is probably bad. Turn the dial counter clockwise one click (left), clockwise three clicks (right), counter clockwise one click (left) then clockwise one click (right).